https://www.mdu.se/

mdu.sePublications
Change search
Link to record
Permanent link

Direct link
Publications (9 of 9) Show all publications
Giliyana, S., Karlsson, J., Bengtsson, M., Salonen, A., Adoue, V. & Hedelind, M. (2024). A Testbed for Smart Maintenance Technologies. In: Lecture Notes in Mechanical Engineering: . Paper presented at 7th International Congress and Workshop on Industrial AI and eMaintenance, IAI 2023, Luleå, Sweden, 13 June 2023 through 15 June 2023 (pp. 437-450). Springer Nature
Open this publication in new window or tab >>A Testbed for Smart Maintenance Technologies
Show others...
2024 (English)In: Lecture Notes in Mechanical Engineering, Springer Nature , 2024, p. 437-450Conference paper, Published paper (Refereed)
Abstract [en]

Industry 4.0 presents nine technologies including Industrial Internet of Things (IIoT), Big Data and Analytics, Augmented Reality (AR), etc. Some of the technologies play an important role in the development of smart maintenance technologies. Previous research presents several technologies for smart maintenance. However, one problem is that the manufacturing industry still finds it challenging to implement smart maintenance technologies in a value-adding way. Open questionnaires and interviews have been used to collect information about the current needs of the manufacturing industry. Both the empirical findings of this paper, as well as previous research, show that knowledge is the most common challenge when implementing new technologies. Therefore, in this paper, we develop and present a testbed for how to approach smart maintenance technologies and to share technical knowledge to the manufacturing industry.

Place, publisher, year, edition, pages
Springer Nature, 2024
Series
Lecture Notes in Mechanical Engineering, ISSN 2195-4356
Keywords
Knowledge, Smart maintenance technologies, Testbed, Augmented reality, Industry 4.0, Maintenance, 'current, Empirical findings, Maintenance technologies, Manufacturing industries, Smart maintenance technology, Testbeds
National Category
Other Engineering and Technologies
Identifiers
urn:nbn:se:mdh:diva-65365 (URN)10.1007/978-3-031-39619-9_32 (DOI)2-s2.0-85181978943 (Scopus ID)9783031396182 (ISBN)
Conference
7th International Congress and Workshop on Industrial AI and eMaintenance, IAI 2023, Luleå, Sweden, 13 June 2023 through 15 June 2023
Available from: 2024-01-17 Created: 2024-01-17 Last updated: 2026-02-27Bibliographically approved
Andersson, S. K., Bruch, J., Hedelind, M. & Granlund, A. (2021). Critical Factors Supporting the Implementation of Collaborative Robot Applications. In: IEEE International Conference on Emerging Technologies and Factory Automation, ETFA: . Paper presented at 26th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA 2021, 7 September 2021 through 10 September 2021. Institute of Electrical and Electronics Engineers (IEEE)
Open this publication in new window or tab >>Critical Factors Supporting the Implementation of Collaborative Robot Applications
2021 (English)In: IEEE International Conference on Emerging Technologies and Factory Automation, ETFA, Institute of Electrical and Electronics Engineers (IEEE) , 2021Conference paper, Published paper (Refereed)
Abstract [en]

The industrial collaborative robot (ICR) is a promising technology for automating assembly systems in manufacturing industries. Yet, ICRs are not widely implemented in the manufacturing industry as there are challenges during its implementation. Furthermore, current research lacks real-world case studies on ICR implementation. Therefore, the purpose of this paper is to investigate the critical factors supporting the implementation of ICR applications in assembly systems. A multiple-case study with eight case companies is presented in this paper, consisting of thirteen interviews. Moreover, critical factors were identified that could mitigate challenges in the ICR implementation process. By this, the study contributes to the current body of research by identifying and structuring the critical factors using a newness perspective. These factors can support the mitigation of potential challenges when manufacturers implement technology with a high novelty into their assembly systems. Specifically, this paper suggests that manufacturing companies focus on relieving operators from unergonomic tasks rather than focusing on high financial and efficiency gains. This finding contradicts previous research suggesting that financial gains are the main goal for manufacturing companies when implementing ICR applications. Moreover, how manufacturers work with external actors might change when implementing ICR applications, compared to traditional robots. Finally, we suggest testing the critical factors in a real-world case study investigating the whole implementing process to see if these factors, in fact, mitigate challenges. 

Place, publisher, year, edition, pages
Institute of Electrical and Electronics Engineers (IEEE), 2021
Series
IEEE Conference on Emerging Technologies and Factory Automation, ISSN 1946-0740, E-ISSN 1946-0759
Keywords
Automated Assembly, Cobot, Industry 4.0, New production technology, Technology adoption, Collaborative robots, Industrial research, Industrial robots, Riveting, 'current, Assembly systems, Case-studies, Critical factors, Manufacturing industries, New production technologies, Real-world, Assembly
National Category
Production Engineering, Human Work Science and Ergonomics
Identifiers
urn:nbn:se:mdh:diva-57106 (URN)10.1109/ETFA45728.2021.9613422 (DOI)000766992600117 ()2-s2.0-85122913091 (Scopus ID)9781728129891 (ISBN)
Conference
26th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA 2021, 7 September 2021 through 10 September 2021
Available from: 2022-02-23 Created: 2022-02-23 Last updated: 2026-02-25Bibliographically approved
Andersson, S. K., Granlund, A., Bruch, J. & Hedelind, M. (2021). Experienced Challenges When Implementing Collaborative Robot Applications in Assembly Operations. International Journal of Automation Technology, 15(5), 678-688
Open this publication in new window or tab >>Experienced Challenges When Implementing Collaborative Robot Applications in Assembly Operations
2021 (English)In: International Journal of Automation Technology, ISSN 1881-7629, E-ISSN 1883-8022, Vol. 15, no 5, p. 678-688Article in journal (Refereed) Published
Abstract [en]

The industrial collaborative robot (ICR) application is a promising automation technology that combines human abilities with the repeatability and accuracy of an industrial robot. Yet, industrial challenges have prevented ICR applications from being implemented extensively in industry. Therefore, the purpose of the presented work is to deepen the knowledge of the key challenges that manufacturers experience during the implementation of ICR applications. In this study, a case study approach was used with eight companies to identify those challenges. The analysis of the qualitative data was conducted based on thirteen interviews with respondents from the industry to identify their challenges when implementing ICR applications. In this paper, a defined implementation process is presented that is combined with three significant areas of challenges relevant for the implementation of ICR applications, i.e., safety, knowledge, and functionality. Then, these areas are used as a basis to identify the corresponding challenges during the early implementation phases. The findings of the study point to an insufficient understanding of safety assessment and a lack of operator involvement in the pre-study phase that was propagated into the later implementation phases. The application design phase was identified to have several ad-hoc approaches due to a lack of knowledge concerning the application of ICR. In the factory installation phase, the challenges included increasing flexibility and ensuring standardised ways of working. This paper makes three distinct contributions to the research community. First, it provides rich data to the research concerning the implementation of applications of ICR, and it focuses on three areas, i.e., safety, knowledge, and functionality, and the challenges associated with their respective implementations. Second, contributions are made to the literature on implementing new technology, and they are focused on the early phases. Third, the results of this paper suggest that the role of system integrators might change in ICR application implementation projects. This paper contributes to practitioners a list of challenges that they might face during the implementation of ICR.

Place, publisher, year, edition, pages
FUJI TECHNOLOGY PRESS LTD, 2021
Keywords
CoBot, assembly, Industry 4.0, industrial robot, case study
National Category
Robotics and automation
Identifiers
urn:nbn:se:mdh:diva-55961 (URN)10.20965/ijat.2021.p0678 (DOI)000693411200013 ()2-s2.0-85115020053 (Scopus ID)
Available from: 2021-09-23 Created: 2021-09-23 Last updated: 2025-10-10Bibliographically approved
Eriksson, A., Music, A., Andersson, S. K. & Hedelind, M. (2021). Supporting Organizational Readiness when Implementing Robot in a Collaborative Environment. In: IEEE International Conference on Emerging Technologies and Factory Automation, ETFA: . Paper presented at 26th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA 2021, 7 September 2021 through 10 September 2021. Institute of Electrical and Electronics Engineers (IEEE)
Open this publication in new window or tab >>Supporting Organizational Readiness when Implementing Robot in a Collaborative Environment
2021 (English)In: IEEE International Conference on Emerging Technologies and Factory Automation, ETFA, Institute of Electrical and Electronics Engineers (IEEE) , 2021Conference paper, Published paper (Refereed)
Abstract [en]

Industry 4.0 brings several technologies that might be useful for manufacturers to become more competitive. One of these technologies is robots in collaborative environments (RCE), which operate fenceless together with the operators. The interest of these robots in the manufacturing sector has been getting more attention recently. Nevertheless, manufacturers should determine their organization's readiness for implementing RCE successfully. Therefore, this paper presents results from a case study conducted at a manufacturing company in Sweden. The case study approach allowed for insights into how manufacturers can approach RCE organizational readiness. The investigated case company was in the process of acquiring a robot in a collaborative environment. The resulting list of critical factors contains aspects concerning four areas to support organizational readiness for RCE, namely, communication, knowledge, organizational, and resistance. By addressing the critical factors presented in the list, manufacturers can identify critical organizational readiness aspects when implementing RCE. 

Place, publisher, year, edition, pages
Institute of Electrical and Electronics Engineers (IEEE), 2021
Series
IEEE Conference on Emerging Technologies and Factory Automation, ISSN 1946-0740, E-ISSN 1946-0759
Keywords
Automated assembly, Automation readiness, Collaborative robot readiness, Industrial collaborative robots, Manufacture, Collaborative environments, Collaborative robots, Critical factors, Industrial collaborative robot, Manufacturing sector, Organizational readiness
National Category
Robotics and automation Production Engineering, Human Work Science and Ergonomics
Identifiers
urn:nbn:se:mdh:diva-57103 (URN)10.1109/ETFA45728.2021.9613534 (DOI)000766992600167 ()2-s2.0-85122937136 (Scopus ID)9781728129891 (ISBN)
Conference
26th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA 2021, 7 September 2021 through 10 September 2021
Available from: 2022-02-24 Created: 2022-02-24 Last updated: 2026-02-25Bibliographically approved
Andersson, S. K., Granlund, A., Hedelind, M. & Bruch, J. (2020). Exploring the Capabilities of Industrial Collaborative Robot Applications. In: Advances in Transdisciplinary Engineering, Volume 13: . Paper presented at 9th Swedish Production Symposium, SPS 2020; Virtual, Online; Sweden; 7 October 2020 through 8 October 2020; (pp. 109-118). IOS Press
Open this publication in new window or tab >>Exploring the Capabilities of Industrial Collaborative Robot Applications
2020 (English)In: Advances in Transdisciplinary Engineering, Volume 13, IOS Press , 2020, p. 109-118Conference paper, Published paper (Refereed)
Abstract [en]

The increase in customization is pushing companies to use more advanced automation technologies in their production lines. Yet, assembly operations are predominantly performed by humans because of their ability to be flexible. The emergence of industrial collaborative robots provides an opportunity to have robots work alongside humans in a flexible and collaborative application. The aim of this study is to explore the industrial collaborative robot capabilities in a collaborative application compared to traditional robot applications. This interview study draws data from four companies with experience in industrial collaborative robot applications. The companies involved in this study experienced that there are several benefits of using an industrial collaborative robot but challenges still exist, in particular related to usability and the robot integration process.

Place, publisher, year, edition, pages
IOS Press, 2020
Series
Advances in transdisciplinary engineering, ISSN 2352-7528
Keywords
Industrial Collaborative Robot, Capabilities, Human-robot collaboration, Interview study
National Category
Other Engineering and Technologies
Research subject
Innovation and Design
Identifiers
urn:nbn:se:mdh:diva-52115 (URN)10.3233/ATDE200148 (DOI)001180173900010 ()2-s2.0-85098667535 (Scopus ID)9781614994398 (ISBN)
Conference
9th Swedish Production Symposium, SPS 2020; Virtual, Online; Sweden; 7 October 2020 through 8 October 2020;
Funder
XPRES - Initiative for excellence in production researchKnowledge Foundation, 22755
Available from: 2020-10-29 Created: 2020-10-29 Last updated: 2026-02-26Bibliographically approved
Haage, M., Piperagkas, G., Papadopoulos, C., Mariolis, I., Malec, J., Bekiroglu, Y., . . . Dimitrios, T. (2017). Teaching Assembly by Demonstration Using Advanced Human Robot Interaction and a Knowledge Integration Framework. Paper presented at 27th International Conference on Flexible Automation and Intelligent Manufacturing, FAIM2017, 27-30 June 2017, Modena, Italy. Procedia Manufacturing, 11, 164-173
Open this publication in new window or tab >>Teaching Assembly by Demonstration Using Advanced Human Robot Interaction and a Knowledge Integration Framework
Show others...
2017 (English)In: Procedia Manufacturing, E-ISSN 2351-9789, Vol. 11, p. 164-173Article in journal (Refereed) Published
Abstract [en]

Conventional industrial robots are heavily dependent on hard automation that requires pre-specified fixtures and time-consuming (re)programming performed by experienced operators. In this work, teaching by human-only demonstration is used for reducing required time and expertise to setup a robotized assembly station. This is achieved by the proposed framework enhancing the robotic system with advanced perception and cognitive abilities, accessed through a user-friendly Human Robot Interaction interface. The approach is evaluated on a small parts’ assembly use case deployed onto a collaborative industrial robot testbed. Experiments indicate that the proposed approach allows inexperienced users to efficiently teach robots new assembly tasks.

Place, publisher, year, edition, pages
Elsevier, 2017
Keywords
Robotic Assembly; Teaching by Demonstration; Sequential Function Charts; Knowledge Integration
National Category
Computer graphics and computer vision
Research subject
Innovation and Design; Computer Science
Identifiers
urn:nbn:se:mdh:diva-52120 (URN)10.1016/j.promfg.2017.07.221 (DOI)000419072100019 ()2-s2.0-85029877595 (Scopus ID)
Conference
27th International Conference on Flexible Automation and Intelligent Manufacturing, FAIM2017, 27-30 June 2017, Modena, Italy
Funder
EU, Horizon 2020, 644938
Available from: 2020-10-29 Created: 2020-10-29 Last updated: 2025-10-10Bibliographically approved
Rossano, G., Martinez, C., Hedelind, M., Murphy, S. & Fuhlbrigge, T. (2013). Easy robot path programming concepts: An industrial perspective on path creation. In: IEEE ISR 2013: . Paper presented at 44th International Symposium on Robotics, ISR 2013. , Article ID 14022247.
Open this publication in new window or tab >>Easy robot path programming concepts: An industrial perspective on path creation
Show others...
2013 (English)In: IEEE ISR 2013, 2013, article id 14022247Conference paper, Published paper (Refereed)
Abstract [en]

One of the key challenges for industrial robotics is the high level of expertise and effort required to program a robust, production-quality robot system. In most cases, a highly trained specialist is required to setup a system, which drives up the installation costs. It can also be difficult and time consuming even for an expert programmer to manually program long, complex robot paths. This is a major issue in today's manufacturing environment where product lifetime is often measured in months. This paper identifies some of the major difficulties in creating robot programs, focusing primarily on issues related to creating and editing a robot path. Next it describes several recent attempts to simplify industrial robot path programming. This paper then analyzes the applicability, strengths and weakness of various approaches assessing them in light of novice, intermediate and advanced users. Lastly, some recommendations are given for further development in this area of simplifying industrial robot path programming.

National Category
Software Engineering
Research subject
Innovation and Design; Computer Science
Identifiers
urn:nbn:se:mdh:diva-52157 (URN)10.1109/ISR.2013.6695710 (DOI)2-s2.0-84893248513 (Scopus ID)978-1-4799-1173-8 (ISBN)
Conference
44th International Symposium on Robotics, ISR 2013
Available from: 2020-10-29 Created: 2020-10-29 Last updated: 2025-10-10Bibliographically approved
Rossano, G., Martinez, C., Hedelind, M., Murphy, S. & Fuhlbrigge, T. (2013). Easy robot programming concepts: An industrial perspective. In: IEEE International Conference on Automation Science and Engineering: . Paper presented at 2013 IEEE International Conference on Automation Science and Engineering, CASE 2013;. IEEE
Open this publication in new window or tab >>Easy robot programming concepts: An industrial perspective
Show others...
2013 (English)In: IEEE International Conference on Automation Science and Engineering, IEEE, 2013Conference paper, Published paper (Refereed)
Abstract [en]

One of the key challenges for industrial robotics is the high level of expertise and effort required to program a robust, production-quality robot system. In most cases, a highly trained specialist is required to setup a system, which drives up the installation costs. Standard text-based methods for programming robots oftentimes result in programs that are difficult to maintain due to their complex program structure and editing methods. This is a major issue in today's manufacturing environment where product changeover is often measured in months. This paper identifies some of the major difficulties in creating robot programs, distinguishing between creating and maintaining the logical program structure and creating robot paths. Next it describes several recent attempts to simplify industrial robot programming, focusing on those two aspects. This paper then analyzes the applicability, strengths and weakness of various approaches assessing them in light of novice, intermediate and advanced users. Lastly, some recommendations are given for further development in this area of simplifying industrial robot programming.

Place, publisher, year, edition, pages
IEEE, 2013
Series
IEEE International Conference on Automation Science and Engineering, ISSN 2161-8070
National Category
Computer Sciences
Research subject
Innovation and Design; Computer Science
Identifiers
urn:nbn:se:mdh:diva-52161 (URN)10.1109/CoASE.2013.6654035 (DOI)2-s2.0-84891500548 (Scopus ID)9781665490429 (ISBN)
Conference
2013 IEEE International Conference on Automation Science and Engineering, CASE 2013;
Available from: 2020-10-29 Created: 2020-10-29 Last updated: 2026-02-13Bibliographically approved
Reddy Vemula, B., Spampinato, G., Hedelind, M., Feng, X. & Brogårdh, T. (2013). Structural synthesis of 3DOF Articulated Manipulators based on Kinematic Evaluation. In: 16th International Conference on Advanced Robotics ICAR 2013: . Paper presented at 16th International Conference on Advanced Robotics ICAR 2013 , 25-29 Nov 2013, Montevideo, Uruguay (pp. Article number 6766460).
Open this publication in new window or tab >>Structural synthesis of 3DOF Articulated Manipulators based on Kinematic Evaluation
Show others...
2013 (English)In: 16th International Conference on Advanced Robotics ICAR 2013, 2013, p. Article number 6766460-Conference paper, Published paper (Refereed)
Abstract [en]

In this study, serial and parallelogram linkage structures are evaluated and compared, on the basis of kinematic performance measures such as workspace and manipulability. Tradeoff relationships between workspace manipulability are established for both the structures, using the configuration of the arm lengths as a design variable. The structures are also analyzed on the basis of their manipulation ability in specific regions of their workspace, providing additional design criteria during the selection of the kinematic structure in the synthesis of industrial articulated robots.

Keywords
Condition Number, Industrial Robot, Singularity, Workspace
National Category
Engineering and Technology Other Engineering and Technologies
Identifiers
urn:nbn:se:mdh:diva-26426 (URN)10.1109/ICAR.2013.6766460 (DOI)000349898600011 ()2-s2.0-84899426922 (Scopus ID)
Conference
16th International Conference on Advanced Robotics ICAR 2013 , 25-29 Nov 2013, Montevideo, Uruguay
Projects
INNOFACTURE - innovative manufacturing development
Available from: 2014-11-02 Created: 2014-10-31 Last updated: 2025-10-10Bibliographically approved
Organisations
Identifiers
ORCID iD: ORCID iD iconorcid.org/0000-0002-5895-0004

Search in DiVA

Show all publications