https://www.mdu.se/

mdu.sePublications
Change search
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf
Heavy metal sorption by sludge-derived biochar with focus on Pb2+ sorption capacity at µg/L concentrations
Mälardalen University, School of Business, Society and Engineering, Future Energy Center.ORCID iD: 0000-0002-9373-2774
School of Business, Society and Engineering, Future Energy Center, Mälardalen University, P.O. Box 883, Västerås, SE-721 23, Sweden.
Mälardalen University, School of Business, Society and Engineering, Future Energy Center.ORCID iD: 0000-0003-0231-564X
Research Unit of Sustainable Chemistry, University of Oulu, P.O. Box 8000, Oulu, FI-90014, Finland.
Show others and affiliations
2020 (English)In: Processes, ISSN 2227-9717, Vol. 8, no 12, p. 1-23, article id 1559Article in journal (Refereed) Published
Abstract [en]

Municipal wastewater management causes metal exposure to humans and the environment. Targeted metal removal is suggested to reduce metal loads during sludge reuse and release of effluent to receiving waters. Biochar is considered a low-cost sorbent with high sorption capacity for heavy metals. In this study, heavy metal sorption to sludge-derived biochar (SDBC) was investigated through batch experiments and modeling and compared to that of wood-derived biochar (WDBC) and activated carbon (AC). The aim was to investigate the sorption efficiency at metal concentrations comparable to those in municipal wastewater (<1 mg/L), for which experimental data are lacking and isotherm models have not been verified in previous works. Pb2+ removal of up to 83% was demonstrated at concentrations comparable to those in municipal wastewater, at pH 2. SDBC showed superior Pb2+ sorption capacity (maximum ~2 mg/g at pH 2) compared to WDBC and AC (<0 and (3.5 ± 0.4) × 10−3 mg/g, respectively); however, at the lowest concentration investigated (0.005 mg/L), SDBC released Pb2+. The potential risk of release of other heavy metals (i.e., Ni, Cd, Cu, and Zn) needs to be further examined. The sorption capacity of SDBC over a metal concentration span of 0.005–150 mg Pb2+/L could be predicted with the Redlich– Peterson model. It was shown that experimental data at concentrations comparable to those in municipal wastewater are necessary to accurately model and predict the sorption capacity of SDBC at these concentrations. 

Place, publisher, year, edition, pages
MDPI AG , 2020. Vol. 8, no 12, p. 1-23, article id 1559
Keywords [en]
Adsorbent, Biosorbent, Heavy metals, Isotherm models, Municipal wastewater, Sewage treatment
National Category
Environmental Biotechnology
Identifiers
URN: urn:nbn:se:mdh:diva-52782DOI: 10.3390/pr8121559ISI: 000602391100001Scopus ID: 2-s2.0-85097001940OAI: oai:DiVA.org:mdh-52782DiVA, id: diva2:1508638
Available from: 2020-12-10 Created: 2020-12-10 Last updated: 2023-09-06Bibliographically approved
In thesis
1. Sludge-derived char: utilisation as a metal sorbent in dilute wastewaters
Open this publication in new window or tab >>Sludge-derived char: utilisation as a metal sorbent in dilute wastewaters
2023 (English)Doctoral thesis, comprehensive summary (Other academic)
Abstract [en]

Metal concentrations in soil and water have increased since the Industrial Revolution, which may have negative health and environmental effects. Metal pollution occurs, for instance, in municipal wastewater, industrial wastewater, and stormwater. Concentrations are often low, due to dilution. A common technology for metal removal is sorption. Char produced from pyrolysis of municipal sludge (SDC), has been pointed out as a potential low-cost sorbent. However, the scientific literature mainly focuses on experiments using artificial solutions at concentrations much higher than those found in said wastewaters (in a Swedish context). 

The goal of this study was to investigate SDC use for the removal of metals, focusing on reuse of SDC in primary treatment (PT) of municipal wastewater and with some attention to other applications. The investigation was performed through experimental laboratory studies, modelling, and literature review/assessment. 

The data obtained from the literature review indicated that sorption is suitable for enhancing removal of nickel (Ni), copper (Cu), cadmium (Cd), lead (Pb), and zinc (Zn) during PT. With respect to Ni and Cu; from ~7–50% and ~10–70%, respectively (no SDC), to ~65–98% and ~45–85%, respectively (with SDC). Experimental results showed that SDC could remove >95% of Pb, Cd, Cu, Cr, Ni, Hg, and Ag from artificial solution, at concentrations similar to those in raw municipal wastewater. However, sorption of Cu and Ni was inhibited in real wastewater (a decrease from >99 and 99%, respectively, to 68 and 40% respectively). The inhibition was linked to the presence of dissolved organic matter. Modelling, based on raw wastewater composition indicated that SDC addition in PT may enhance the removal of Cd and Cu (from 39% to 79% and 30 % to 43%, respectively). 

Experiments showed that the investigated SDC had a larger Pb sorption capacity, compared to activated carbon and wood-derived char. Experimental investigations and modelling (sorption isotherms) indicated that literature data did not give satisfactory estimations of the Pb sorption capacity onto SDC at concentrations considered; the available data was generally valid for much higher concentrations. 

The experimentally determined Cd sorption capacity of SDC produced from primary sludge exceeded that of SDC produced from digested sludge. However, given the loss of biogas production the theoretical energy balance of primary sludge pyrolysis was negative. Finally, the local demand for Cd-sorbent in the Västerås region could potentially be covered by the SDC generated locally.

Place, publisher, year, edition, pages
Västerås: Mälardalen University, 2023
Series
Mälardalen University Press Dissertations, ISSN 1651-4238 ; 387
Keywords
sorption, adsorption, sludge, biosolids, metal, wastewater treatment, sorption, adsorption, slam, metaller, avloppsvattenrening
National Category
Environmental Engineering
Research subject
Energy- and Environmental Engineering
Identifiers
urn:nbn:se:mdh:diva-64123 (URN)978-91-7485-607-1 (ISBN)
Public defence
2023-10-20, Zeta, Mälardalens universitet, Västerås, 14:00 (English)
Opponent
Supervisors
Available from: 2023-09-07 Created: 2023-09-06 Last updated: 2023-09-29Bibliographically approved

Open Access in DiVA

No full text in DiVA

Other links

Publisher's full textScopus

Authority records

Sylwan, IdaWestholm, Lena JohanssonThorin, Eva

Search in DiVA

By author/editor
Sylwan, IdaRuntti, HannaWestholm, Lena JohanssonThorin, Eva
By organisation
Future Energy Center
In the same journal
Processes
Environmental Biotechnology

Search outside of DiVA

GoogleGoogle Scholar

doi
urn-nbn

Altmetric score

doi
urn-nbn
Total: 83 hits
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf