https://www.mdu.se/

mdh.sePublikasjoner
Endre søk
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Model scale fire experiments in a model tunnel with wooden pallets at varying distances
Mälardalens högskola, Akademin för hållbar samhälls- och teknikutveckling. (MERO)ORCID-id: 0000-0002-8326-2860
Mälardalens högskola, Akademin för hållbar samhälls- och teknikutveckling. (MERO)
2010 (engelsk)Rapport (Annet vitenskapelig)
Abstract [en]

This report is part of the research project “Concept for fire and smoke spread prevention in mines”, conducted by a research group at Mälardalen University. The project is aimed at improving fire safety in mines in order to obtain a safer working environment for the people working for the mining companies in Sweden or for visitors in mines open to the public.

This report comprises a number of model scale fire experiments conducted in a model tunnel at SP facilities in Borås, Sweden.

The main purposes of the report are:

- Obtain data which can validate models to calculate the total heat release rate of multiple objects

- To investigate the influence on the heat release rate curve that a varying distance between the fuel objects will have.

- To investigate the influence on the heat release rate, fire growth rate and time to ignition for adjacent fuel objects. The effects of ventilation are taken into account in the model..

The work in this report started with describing the theoretical basis of scaling theory and the determination of heat release rate at fire experiments, continuing with describing the experimental setup with the fuel load and instrumentation used. After that the experimental procedure and the experimental results were described and analysed. The results from the experiments were thereafter discussed and finally conclusions were drawn.

The findings and conclusions of the study were as following:

It was found that an increasing ventilation rate slightly increases the maximum heat release rate, which is in accordance with earlier research.

The ventilation rate will have an influence on the fire growth rate. In the tests with the highest ventilation rate, a slower fire growth rate was displayed compared to the other two cases. This could possibly be explained by the fact that the height of the pile of wooden pallets (205 mm) was practically equal to the short side of the pile (200 mm) and the fire was started on the long side, thus as the longitudinal ventilation is increased less fuel area is exposed to the tilted flames resulting in that less parts take place in the combustion during the growth phase and thus the fire growth rate decreases.

When studying the graphs of the various heat release rates it was found that when the distance between pile #1 and pile #2 increased to a certain level the ignition of pile #2 will be delayed resulting in that not all piles are burned with their maximum heat release rate at the same time.

The delay in ignition of adjacent pallet can be distinguished by a “hump” before the peak value in the heat release rate curves. In cases with short distances between the piles the ignition of 3 adjacent piles took place almost simultaneously and resulting in a total heat release curve where the pallet piles burn at their maximum at nearly the same time, i.e. the effects of the delay of ignition is not really showing up in the time to reach maximum heat release rate.

It was also found that the peak value of the heat release rate decreases as the distances between the piles are increased – from ~500 kW down to ~450 kW – as the curve is stretched out in time.

The ignition data indicated that the time to ignition of adjacent piles would decrease as the longitudinal ventilation was increased.

Further validation work should take place with respect to validating the experimental data with output data from theoretical models.

Further studies and experiments should take place that vary additional parameters besides the distance between the individual fuel objects. This in order to make further comparisons with calculation models to predict the total heat release rates of complex objects, such as for example a vehicle.

sted, utgiver, år, opplag, sider
Västerås: Mälardalens högskola , 2010. , s. 33
Serie
Studies in Sustainable Technology / Forskningsrapport ; 2010:8
HSV kategori
Forskningsprogram
energi- och miljöteknik
Identifikatorer
URN: urn:nbn:se:mdh:diva-10110OAI: oai:DiVA.org:mdh-10110DiVA, id: diva2:343153
Prosjekter
GruvanTilgjengelig fra: 2010-08-12 Laget: 2010-08-12 Sist oppdatert: 2014-01-07bibliografisk kontrollert

Open Access i DiVA

fulltekst(578 kB)1444 nedlastinger
Filinformasjon
Fil FULLTEXT01.pdfFilstørrelse 578 kBChecksum SHA-512
e7697d78f13506943e6b077f3793352e6ec8877cd4bbdc60ba433965400804601c1776d6be2a05541f7b4bd03305bb5bc4ab789aa8e8e68c9e174d8d913da1c4
Type fulltextMimetype application/pdf

Person

Hansen, Rickard

Søk i DiVA

Av forfatter/redaktør
Hansen, RickardIngason, Haukur
Av organisasjonen

Søk utenfor DiVA

GoogleGoogle Scholar
Totalt: 1444 nedlastinger
Antall nedlastinger er summen av alle nedlastinger av alle fulltekster. Det kan for eksempel være tidligere versjoner som er ikke lenger tilgjengelige

urn-nbn

Altmetric

urn-nbn
Totalt: 478 treff
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf