https://www.mdu.se/

mdu.sePublications
Change search
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf
Diagnostics-Oriented Modelling of Micro Gas Turbines for Fleet Monitoring and Maintenance Optimization
Mälardalen University, School of Business, Society and Engineering, Future Energy Center. (SOFIA)ORCID iD: 0000-0003-3610-4680
Mälardalen University, School of Business, Society and Engineering, Future Energy Center. (SOFIA)ORCID iD: 0000-0001-6101-2863
Mälardalen University, School of Business, Society and Engineering, Future Energy Center. (SOFIA)
Mälardalen University, School of Business, Society and Engineering, Future Energy Center. (SOFIA)ORCID iD: 0000-0002-8466-356X
2018 (English)In: Processes, ISSN 2227-9717, Vol. 6, no 11Article in journal (Refereed) Published
Abstract [en]

The market for the small-scale micro gas turbine is expected to grow rapidly in the coming years. Especially, utilization of commercial off-the-shelf components is rapidly reducing the cost of ownership and maintenance, which is paving the way for vast adoption of such units. However, to meet the high-reliability requirements of power generators, there is an acute need of a real-time monitoring system that will be able to detect faults and performance degradation, and thus allow preventive maintenance of these units to decrease downtime. In this paper, a micro gas turbine based combined heat and power system is modelled and used for development of physics-based diagnostic approaches. Different diagnostic schemes for performance monitoring of micro gas turbines are investigated.

Place, publisher, year, edition, pages
2018. Vol. 6, no 11
Keywords [en]
micro gas turbine; modelling; diagnostics, gas path analysis, analysis by synthesis
National Category
Energy Systems
Research subject
Energy- and Environmental Engineering
Identifiers
URN: urn:nbn:se:mdh:diva-41514DOI: 10.3390/pr6110216ISI: 000451530400012Scopus ID: 2-s2.0-85057867402OAI: oai:DiVA.org:mdh-41514DiVA, id: diva2:1268726
Projects
FUDIPOAvailable from: 2018-12-06 Created: 2018-12-06 Last updated: 2021-11-12Bibliographically approved
In thesis
1. Towards a learning system for process and energy industry: Enabling optimal control, diagnostics and decision support
Open this publication in new window or tab >>Towards a learning system for process and energy industry: Enabling optimal control, diagnostics and decision support
2019 (English)Licentiate thesis, comprehensive summary (Other academic)
Abstract [en]

Driven by intense competition, increasing operational cost and strict environmental regulations, the modern process and energy industry needs to find the best possible way to adapt to maintain profitability. Optimization of control and operation of the industrial systems is essential to satisfy the contradicting objectives of improving product quality and process efficiency while reducing production cost and plant downtime. Use of optimization not only improves the control and monitoring of assets but also offers better coordination among different assets. Thus, it can lead to considerable savings in energy and resource consumption, and consequently offer a reduction in operational costs, by offering better control, diagnostics and decision support. This is one of the main driving forces behind developing new methods, tools and frameworks that can be integrated with the existing industrial automation platforms to benefit from optimal control and operation. The main focus of this dissertation is the use of different process models, soft sensors and optimization techniques to improve the control, diagnostics and decision support for the process and energy industry. A generic architecture for an optimal control, diagnostics and decision support system, referred to here as a learning system, is proposed. The research is centred around an investigation of different components of the proposed learning system. Two very different case studies within the energy-intensive pulp and paper industry and the promising micro-combined heat and power (CHP) industry are selected to demonstrate the learning system. One of the main challenges in this research arises from the marked differences between the case studies in terms of size, functions, quantity and structure of the existing automation systems. Typically, only a few pulp digesters are found in a Kraft pulping mill, but there may be hundreds of units in a micro-CHP fleet. The main argument behind the selection of these two case studies is that if the proposed learning system architecture can be adapted for these significantly different cases, it can be adapted for many other energy and process industrial cases. Within the scope of this thesis, mathematical modelling, model adaptation, model predictive control and diagnostics methods are studied for continuous pulp digesters, whereas mathematical modelling, model adaptation and diagnostics techniques are explored for the micro-CHP fleet.

Place, publisher, year, edition, pages
Västerås: Mälardalen University, 2019. p. 178
Series
Mälardalen University Press Licentiate Theses, ISSN 1651-9256 ; 282
Keywords
Learning system, Supervisory system, Pulp and paper, Micro gas turbine, Process modelling, Model-based control, Diagnostics, Decision support, Anomaly detection, Fault detection
National Category
Energy Engineering
Research subject
Energy- and Environmental Engineering
Identifiers
urn:nbn:se:mdh:diva-45219 (URN)978-91-7485-438-1 (ISBN)
Presentation
2019-10-30, Pi, Mälardalen University, Västerås, 13:00 (English)
Opponent
Supervisors
Projects
FUDIPO – FUture DIrections for Process industry Optimization
Funder
EU, Horizon 2020, 723523
Available from: 2019-09-16 Created: 2019-09-16 Last updated: 2021-11-30Bibliographically approved
2. On a learning system for industrial automation: Model-based control and diagnostics for decision support
Open this publication in new window or tab >>On a learning system for industrial automation: Model-based control and diagnostics for decision support
2022 (English)Doctoral thesis, comprehensive summary (Other academic)
Abstract [en]

Access to energy is fundamental to economic and technological advancement. Hence, the more the world develops, the greater the demand for energy becomes. Evidently, the production and consumption of energy alone account for more than 80% of global anthropogenic greenhouse gas (GHG) emissions. There is broad scientific consensus that efficiency improvements in energy production and consumption must come first on the path to reducing global GHG emissions. As the largest producer and consumer of energy, the industrial sector faces tremendous challenges due to stringent environmental regulations, intense price-based global competition, rising operating costs and rapidly changing economic conditions. Therefore, increasing energy and resource efficiency while improving throughput and asset reliability is a matter of utmost importance. Satisfying such demanding objectives requires an optimal operation, control and monitoring of plant assets and processes. This is one of the main driving forces behind developing digital solutions, methods, and frameworks that can be integrated with old and new industrial automation platforms. The main focus of this dissertation is to investigate frameworks, process models, soft sensors, control optimization, and diagnostic techniques to improve the operation, control, and monitoring of industrial plants and processes. In this thesis, a generic architecture for control optimization, diagnostics, and decision support system, referred to here as a learning system, is proposed. The research is centred around an investigation of different components of the proposed learning system. Two very different case studies, one representing large-scale assets and another representing a fleet of small-scale assets, are considered to demonstrate the genericness of the proposed system architecture. In this thesis, a very energy-intensive chemical pulping process represents the case study of large-scale assets, and a micro gas turbine (MGT) fleet for distributed heat and power generation represent the case study of a fleet of small-scale assets. One of the main challenges in this research arises from the marked differences between the case studies in terms of size, functions, quantity, and structure of the existing automation systems. Typically, only a few pulp digesters are found in a Kraft pulping mill, but there may be hundreds of units in a MGT fleet. The main argument behind the selection of these two case studies is that, if the proposed learning system architecture can be adapted for these significantly different cases, then it can be adapted for many other industrial applications as well. Within the scope of this thesis, mathematical modelling, model adaptation, model predictive control, and diagnostics methods are studied for continuous pulp digesters, whereas mathematical modelling, model adaptation, and diagnostics techniques are explored for the MGT fleet. Due to the naturally varying wood quality, significant residence time, insufficient measurements, and complexity of pulping reactions, modelling and controlling a continuous pulp digester is a challenging task. Moreover, process abnormalities due to non-ideal flow in the digester often occur that considerably affect the pulp quality. Within this dissertation, variation of wood-chip quality is identified as one of the main process disturbances. Thereafter, a feedforward model predictive control (MPC) approach is explored by feedforwarding the lignin content of the wood chips to the controller. The result shows that the disturbance rejection and tracking performance of the feedforward MPC are superior to other alternatives, like Proportional–integral–derivative (PID), MPC, and current industrial control. When it comes to diagnostics, a literature gap is identified in the area of modelling digester faults. Hence, the well-known Purdue model, a widely used dynamic model of the digester, is extended to simulate process faults like screen-clogging, hangups, and channelling. The findings suggest that both hangups and channelling considerably affect the pulp quality at the blowline. The impact of channelling is prominent on reaction temperature compared to hangups, while hangups change the residence time of the wood chips significantly. Subsequently, a hybrid diagnostics scheme for pulp digester, combining a physical model and a Bayesian network (BN), is demonstrated. Overall, the results show that fault type and severity can be estimated with acceptable accuracy even in presence of noise. Enabling remote fleet diagnostics is expected to foster the commercialization of distributed micro-combined heat and power (micro-CHP) generators, i.e., MGTs. Even though the modelling and diagnostics of large-scale gas turbines are well researched, studies targeting MGT are limited. In this thesis, a physical model of a commercial MGT system is developed. Subsequently, a hybrid scheme by combining a physics-based gas path analysis with a data-driven approach is used to enable MGT diagnostics. The proposed scheme was tested by simulating case studies corresponding to single and multiple faults. Furthermore, sensitivity studies are performed for different measurement uncertainties (i.e., sensor noise and bias) to evaluate the robustness of the scheme against measurement uncertainties. The findings show that the proposed diagnostics approach performs satisfactorily even under measurement uncertainties. To sum up, the increased availability of data and higher computing power is fostering the development of accurate process models and algorithms necessary for optimal operation, control, and monitoring of industrial processes. With the emergence of new measurement techniques, it is possible to leverage productivity and quality with tighter control of key process parameters. Additionally, studying the underlying mechanism of process degradation and developing diagnostics methods by incorporating these can lead to significant economic benefits. Having said that, to tap the full potential of these digital solutions, an integrated framework like that presented in this thesis, i.e., a learning system is essential.

Place, publisher, year, edition, pages
Västerås: Mälardalen University, 2022
Series
Mälardalen University Press Dissertations, ISSN 1651-4238 ; 354
Keywords
Learning system, Supervisory system, Pulp and paper, Micro gas turbine, Process modelling, Model-based control, Diagnostics, Decision support, Anomaly detection, Fault detection
National Category
Engineering and Technology Energy Systems
Research subject
Energy- and Environmental Engineering
Identifiers
urn:nbn:se:mdh:diva-56514 (URN)978-91-7485-537-1 (ISBN)
Public defence
2022-01-21, Gamma och digitalt via Zoom, Mälardalens högskola, Västerås, 09:15 (English)
Opponent
Supervisors
Projects
FUDIPO
Available from: 2021-11-15 Created: 2021-11-12 Last updated: 2022-01-12Bibliographically approved

Open Access in DiVA

No full text in DiVA

Other links

Publisher's full textScopus

Authority records

Zaccaria, ValentinaXin, ZhaoKyprianidis, Konstantinos

Search in DiVA

By author/editor
Rahman, MoksadurZaccaria, ValentinaXin, ZhaoKyprianidis, Konstantinos
By organisation
Future Energy Center
In the same journal
Processes
Energy Systems

Search outside of DiVA

GoogleGoogle Scholar

doi
urn-nbn

Altmetric score

doi
urn-nbn
Total: 90 hits
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf