https://www.mdu.se/

As of today, AUTOSAR is the de facto standard in the automotive industry, providing a common software architecture and development process for automotive applications. While this standard is originally written for singlecore operated Electronic Control Units (ECU), new guidelines and recommendations have been added recently to provide support for multicore architectures. This update came as a response to the steady increase of the number and complexity of the software functions embedded in modern vehicles, which call for the computing power of multicore execution environments. In this paper, we enumerate and analyze the design options and the challenges of porting AUTOSAR-based automotive applications onto multicore platforms. In particular, we investigate those options when considering the emerging many-core architectures that provide a more 'scalable' environment than the traditional multicore systems. Such platforms are suitable to enable massive parallel execution, and their design is more suitable for partitioning and isolating the software components.

Today’s automotive embedded systems comprise a multitude of functionalities, many with complex timing re- quirements. Besides task specific timing requirements, such ap- plications often have timing requirements for the propagation of data through a chain of tasks. An important metric for control applications is the data age, which is addressed in this work. The analysis of such systems is non-trivial because tasks involved in the data propagation may execute at different periods, which leads to over and undersampling within one chain. This work presents a novel method to compute worst- and best-case end-to-end latencies for such systems. A second contribution synthesizes job-level dependencies for such task sets in a way that data paths which exceed the age constraint are eliminated. An extensive evaluation is performed on synthetic task sets and the applicability to industrial applications is demonstrated in a case study.

A majority of multi-rate real-time systems are constrained by a multitude of timing requirements, in addition to the traditional deadlines on well-studied response times. This means, the timing predictability of these systems not only depends on the schedulability of certain task sets but also on the timely propagation of data through the chains of tasks from sensors to actuators. In the automotive industry, four different timing constraints corresponding to various data propagation delays are commonly specified on the systems. This paper identifies and addresses the source of pessimism as well as optimism in the calculations for one such delay, namely the reaction delay, in the state-of-the-art analysis that is already implemented in several industrial tools. Furthermore, a generic framework is proposed to compute all the four end-to-end data propagation delays, complying with the established delay semantics, in a scheduler and hardware-agnostic manner. This allows analysis of the system models already at early development phases, where limited system information is present. The paper further introduces mechanisms to generate job-level dependencies, a partial ordering of jobs, which need to be satisfied by any execution platform in order to meet the data propagation timing requirements. The job-level dependencies are first added to all task chains of the system and then reduced to its minimum required set such that the job order is not affected. Moreover, a necessary schedulability test is provided, allowing for varying the number of CPUs. The experimental evaluations demonstrate the tightness in the reaction delay with the proposed framework as compared to the existing state-of-the-art and practice solutions.

Automotive embedded systems are subjected to stringent timing requirements that need to be verified. One of the most complex timing requirement in these systems is the data age constraint. This constraint is specified on cause- effect chains and restricts the maximum time for the propagation of data through the chain. Tasks in a cause-effect chain can have different activation patterns and different periods, that introduce over- and under-sampling effects, which additionally aggravate the end-to-end timing analysis of the chain. Furthermore, the level of timing information available at various development stages (from modeling of the software architecture to the software implementation) varies a lot, the complete timing information is available only at the implementation stage. This uncertainty and limited timing information can restrict the end-to-end timing analysis of these chains. In this paper, we present methods to compute end-to-end delays based on different levels of system information. The characteristics of different communication semantics are further taken into account, thereby enabling timing analysis throughout the development process of such heterogeneous software systems. The presented methods are evaluated with extensive experiments. As a proof of concept, an industrial case study demonstrates the applicability of the proposed methods following a state-of-the-practice development process.

Next generations of compute-intensive real-time applications in automotive systems will require more powerful computing platforms. One promising power-efficient solution for such applications is to use clustered many-core architectures. However, ensuring that real-time requirements are satisfied in the presence of contention in shared resources, such as memories, remains an open issue. This work presents a novel contention-free execution framework to execute automotive applications on such platforms. Privatization of memory banks together with defined access phases to shared memory resources is the backbone of the framework. An Integer Linear Programming (ILP) formulation is presented to find the optimal time-triggered schedule for the on-core execution as well as for the access to shared memory. Additionally a heuristic solution is presented that generates the schedule in a fraction of the time required by the ILP. Extensive evaluations show that the proposed heuristic performs only 0.5% away from the optimal solution while it outperforms a baseline heuristic by 67%. The applicability of the approach to industrially sized problems is demonstrated in a case study of a software for Engine Management Systems.

Many-core processors can provide the computational power required by future complex embedded systems. However, their adoption is not trivial, since several sources of interference on COTS many-core platforms have adverse effects on the resulting performance. One main source of performance degradation is the contention on the Network-on-Chip, which is used for communication among the compute cores via the off- chip memory. Available analysis techniques for the traversal time of messages on the NoC do not consider many of the architectural features found on COTS platforms. In this work, we target a state-of-the-art many-core processor, the Kalray MPPA R . A novel partitioning strategy for reducing the contention on the NoC is proposed. Further, we present an analysis technique dedicated to the proposed partitioning strategy, which considers all architectural features of the COTS NoC. Additionally, it is shown how to configure the parameters for flow-regulation on the NoC, such that the Worst-Case Traversal Time (WCTT) is minimal and buffers never overflow. The benefits of our approach are evaluated based on extensive experiments that show that contention is significantly reduced compared to the unconstrained case, while the proposed analysis outperforms a state-of-the-art analysis for the same platform. An industrial case study shows the tightness of the proposed analysis.

Access to shared memory is one of the main chal- lenges for many-core processors. One group of scheduling strategies for such platforms focuses on the division of tasks’ access to shared memory and code execution. This allows to orchestrate the access to shared local and off-chip memory in a way such that access contention between different compute cores is avoided by design. In this work, an execution framework is introduced that leverages local memory by statically allocating a subset of tasks to cores. This reduces the access times to shared memory, as off-chip memory access is avoided, and in turn improves the schedulability of such systems. A Constrained Programming (CP) formulation is presented to selects the statically allocated tasks and generates the complete system schedule. Evaluations show that the pro- posed approach yields an up to 21% higher schedulability ratio than related work, and a case study demonstrates its applicability to industrial problems.