mdh.sePublikationer
Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Kartläggning av orsaker till skillnad mellan beräknad och uppmätt energianvändning i byggnader.: Identifiering av prioriterade arbetsområden inom energisimulering och energiuppföljning.
Mälardalens högskola, Akademin för ekonomi, samhälle och teknik.
2015 (Svenska)Självständigt arbete på avancerad nivå (masterexamen), 20 poäng / 30 hpStudentuppsats (Examensarbete)
Abstract [en]

As a result of high energy use in buildings, the rules for energy conservation has, since 2006, become stricter in Sweden. Today, it must be verified that buildings meet the requirements of specific energy consumption (energy consumption per square meter heated floor area), with a calculation of the energy performance in a simulation program and by measuring the energy performance when the building is done. This in addition to the requirement that the average coefficient of thermal transmittance and the installed electrical power, for electrically heated buildings, must be calculated at the design stage. It is, however, often noted that the result of the calculations and measurements differ from each other, and that the measured values ​​often are higher than those calculated. In collaboration with NCC and Mälardalens University, an investigation was made in which the calculated and measured values ​​of energy were examined for a number of apartment buildings, schools and sports halls, to identify causes of difference, and to identify priority areas of work within, above all , energy simulation and energy follow-ups. It turned out that the difference is largely influenced by the type of the building, as it differed between apartment buildings, schools and sports halls. In addition, the amount of window area turned out to have impact on the results, as it allows for more airing, which is a factor that is very difficult to anticipate for the simulations. The windows ability to let in sunlight is another factor that is hard to anticipate. Furthermore, it was discovered that the standard values for the assumed energy consumption for domestic hot water is often too high. In some cases the assumed heated floor area and the assumed outdoor climate data differed between calculations and measurements. It also happens that heat losses from culvert pipes to the ground is not taken into account when calculations are done. As for priority areas of work, judging by the results of this work, better behavior related input data and standard values ​​for, above all, energy consumption for hot water needs to be developed. There has to be more diligence when ensuring that there are same conditions for calculations and measurements, and this could mean that those who perform the calculation may need to be assigned more responsibility over the measuring work. In addition, the follow-up work must be envisaged in the long term, which means that the number of registers should be sufficient to distinguish the different parameters, that consumes energy, apart to make it possible to learn from the over-/underestimation, and base future input and standard values ​​on it. This may mean that the simulation-/measure-work should not be limited only to comply with applicable laws, but it should be ensured that follow-up work can be done in such a way that it helps to improve the future work of simulations and measurements of energy use in buildings.

Ort, förlag, år, upplaga, sidor
2015.
Nyckelord [sv]
Specifik energianvändning, energiprestanda, energisimulering, energiuppföljning, BBR
Nationell ämneskategori
Annan samhällsbyggnadsteknik
Identifikatorer
URN: urn:nbn:se:mdh:diva-28752OAI: oai:DiVA.org:mdh-28752DiVA, id: diva2:848053
Externt samarbete
NCC
Ämne / kurs
Byggnadsteknik
Handledare
Examinatorer
Tillgänglig från: 2015-10-15 Skapad: 2015-08-23 Senast uppdaterad: 2015-10-15Bibliografiskt granskad

Open Access i DiVA

fulltext(1607 kB)433 nedladdningar
Filinformation
Filnamn FULLTEXT01.pdfFilstorlek 1607 kBChecksumma SHA-512
326e0f19331a0eeea18b2d6a4c99e07dd2cf1cf2bc0a25cb153b74a797c5add8bca763934e701727c02d20a33b502a1a051cabe93aa0b1d54cda1350585b8cda
Typ fulltextMimetyp application/pdf

Av organisationen
Akademin för ekonomi, samhälle och teknik
Annan samhällsbyggnadsteknik

Sök vidare utanför DiVA

GoogleGoogle Scholar
Totalt: 433 nedladdningar
Antalet nedladdningar är summan av nedladdningar för alla fulltexter. Det kan inkludera t.ex tidigare versioner som nu inte längre är tillgängliga.

urn-nbn

Altmetricpoäng

urn-nbn
Totalt: 659 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf