https://www.mdu.se/

mdu.sePublikationer
Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Fiberföstärkning av Limträbalkar
Mälardalens högskola, Akademin för ekonomi, samhälle och teknik.
2013 (Svenska)Självständigt arbete på avancerad nivå (masterexamen), 20 poäng / 30 hpStudentuppsats (Examensarbete)
Abstract [en]

Glulam is a product that was engineered to make use of timber in a more efficient way. Bychoosing timber of similar quality and discarding natural defects during production, thedevelopment of a stronger cross-section is achieved.Carbon fiber is a relatively new material with a high tension capacity. This feature is used toexamine how the bending capacity of the beams improve by adhering carbon fiber laminateson the lower edge of the beamsThe strength of the material is tested with three experiments: carbon fiber on the bottom of thebeam (a), carbon fiber attached to the lower sides of the beam (b) and carbon fiber in thebeam, covered with a layer of wood (c)

The results show that the first case, where the carbon fiber is attached to the bottom of thebeam, gave the best result with an increase in capacity of 59 % compared to the nonreinforcedcontrol. The other two cases also show an improvement in capacity, beam-type 3had a capacity increase of 47% and beam-type 4 increased with 25 %Tests were also made with glulam beams reinforced with fiberglass, but these tests were notanalyzed in depth because the purpose was to compare the capacity to carbon fiber. Thisbeam improved its capacity by 40.3%.The tests show that carbon fiber as a reinforcement material for glulam is a good choice whenthere is a requirement for stronger cross-sections in both new production and renovation ofold buildings. However there are some disadvantages to carbon fiber, for example costs andincreased demands on work environment, which makes steel a cheaper option.

Ort, förlag, år, upplaga, sidor
2013. , s. 118
Nyckelord [en]
Gluelam, Carbon fibre, bending capacity
Nyckelord [sv]
Limträ, Kolfiber, Böjkapacitet
Nationell ämneskategori
Annan samhällsbyggnadsteknik Husbyggnad Byggproduktion
Identifikatorer
URN: urn:nbn:se:mdh:diva-20355OAI: oai:DiVA.org:mdh-20355DiVA, id: diva2:638026
Ämne / kurs
Byggnadsteknik
Handledare
Examinatorer
Tillgänglig från: 2013-08-20 Skapad: 2013-07-25 Senast uppdaterad: 2013-08-20Bibliografiskt granskad

Open Access i DiVA

fulltext(3043 kB)1001 nedladdningar
Filinformation
Filnamn FULLTEXT01.pdfFilstorlek 3043 kBChecksumma SHA-512
28414552250f5b195dbc6a20ad9fe9982fe8ec07d5c77520fa7f62f8aec457ce38849c34dd73e06ec40f404ce63b828f55815d1e9e0f505f6f1a37ef0bccf254
Typ fulltextMimetyp application/pdf

Av organisationen
Akademin för ekonomi, samhälle och teknik
Annan samhällsbyggnadsteknikHusbyggnadByggproduktion

Sök vidare utanför DiVA

GoogleGoogle Scholar
Totalt: 1001 nedladdningar
Antalet nedladdningar är summan av nedladdningar för alla fulltexter. Det kan inkludera t.ex tidigare versioner som nu inte längre är tillgängliga.

urn-nbn

Altmetricpoäng

urn-nbn
Totalt: 514 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf